Mon–Fri: 7 AM–9 PM, Sat–Sun: 6 AM–9 PM(559) 409-1169
EnergyFit Visalia Insulation SolutionsEnergyFit Visalia Insulation Solutions

Insulation Contractor in Lemoore, CA - Attics and Crawl Spaces Done in Order

EnergyFit Visalia Insulation Solutions insulates attics, walls and crawl spaces in Lemoore, CA. We seal the gaps first, clear out old or damaged material when it has to go, then top up the insulation so rooms hold their temperature.

Narrow room with white closed-cell foam insulation coating the walls and ceiling above a dark tiled floor.
Commercial insulation in a large workshop, with white foam-coated walls, a dark exposed roof, and a suspended industrial fan.

Lemoore houses, from the attic down to the sills

Lemoore calls usually start the same way, with a hot upstairs, a room over the garage that never settles down, or floors that run cold. Closer to downtown we see older houses on raised floors with a crawl space underneath, and farther out we see newer houses where the attic is most of the story. We do the same work next door in Hanford and over in Lindsay, but each house gets looked at on its own, because what's in the attic or under the floor is different every time.

The Sarah A. Mooney Memorial Museum downtown reports that its own building, built with Sierra redwood, has held up well above, while the sill plates, the boards at the base of the walls, have broken down from ground moisture and dry rot. That's the spot I check first under a raised floor in Lemoore, because insulating over damp or soft wood hides the problem instead of fixing it.

What we do for Lemoore homes and buildings

Working in Lemoore: permits, licenses and what sets the price

Before a Lemoore job starts, I check with the city or county office that covers your address on whether the work needs a permit, and when it does, we apply for it as your licensed contractor and meet the inspector on site. That check comes first on the schedule, and if you'd like to ask the city yourself, start at the City of Lemoore website. Ask any contractor for two things before they climb into your attic, a California contractor license and a Lemoore city business license, and you'll find what each one covers in the questions below. We're licensed and insured.

We come over from Visalia, so a Lemoore job gets the same crew and the same order of work as one close to home. What moves the price is what I find on the first visit: how many inches are already up there, whether old material has to come out first, how many gaps need sealing, how easy the attic or crawl space is to get into, and whether foam or loose fill fits. The schedule turns on the permit check and on any cleanout, because removal has to finish before anything new goes in, and your written estimate with photos gives you the figure for your own house.

  • Under a raised floor, moisture gets handled before insulation goes up, so a vapor barrier or a repair by another trade may need to come first.
  • In the attic, we seal around can lights, pipes and the hatch before adding fill, so the new insulation isn't fighting a draft.
  • We keep the eave vents clear and carry the depth all the way to the edges, where coverage usually runs thin.
  • Foam costs more, so I only point you to it when the ducts run through the attic or a spot needs moisture blocked. Otherwise sealing the gaps and topping up loose fill does the job.
  • If I find a soaked or dirty layer, I'll tell you it has to come out first rather than bury it under new material.

Get a written insulation estimate for your Lemoore house

Send the form or call (559) 409-1169 and we'll reply within one business day to set a time. I come out myself, look at the attic and crawl space, and give you a free written estimate with photos of what I found. There's no obligation to go ahead.

(559) 409-1169

Questions Lemoore homeowners ask about hiring an insulation contractor

Does a contractor working in Lemoore need a city business license?

Yes, the city requires every person or business doing business inside Lemoore's city limits to hold a Business License Certificate. Each license expires on December 31 and has to be renewed every year, so it's fair to ask whether a contractor's is current. The city lays out its rules on its business license page.

When does an insulation contractor need a California state license?

A contractor needs a state license when the job needs a building permit, uses any additional workers, or costs $1,000 or more in labor and materials. The Contractors State License Board licenses and regulates contractors in California, and it treats a small job as exempt only when no permit is needed, no employees work on it and the whole thing comes to less than $1,000. I'm glad to show you our license at the estimate.

How much can a contractor ask for as a down payment on a home improvement job in California?

No more than $1,000 or 10 percent of the total contract price, whichever is less. That's the state contractors board's cap for home improvement projects, so a bigger request up front is a reason to stop and ask questions.

Do we have to leave the house while the attic gets insulated?

Usually not for loose fill or air sealing, because that work stays up in the attic and at the hatch. Spray foam is different, since you stay out until the re-entry time, the wait the foam maker sets before people can come back in. I'll tell you at the estimate which one your job needs, so you can plan for the kids and pets.

Service areas

We're based in Visalia and work across the cities around it, from Kingsburg and Selma to Hanford and Woodlake. These are the cities with their own page here, and if yours isn't named, call and ask.

Have me look before anything goes in

Call (559) 409-1169 or send the form, and you'll know what order your job should go in, and whether part of it belongs to another trade, before any money changes hands.

If a room in your Lemoore house won't stay comfortable, tell us what's going on and we'll take it from there.

Tell us about your project
(559) 409-1169Get an estimate